Speco Technologies CVC-6246IHR User Manual

Please read this manual thoroughly before operation and keep it handy for further reference. CVC-6246iHR540 Line Color Dome CameraIntensifier S

8 2. Joy Stick Video Test TerminalLEFTDOWNUPRIGHTSETPush the Joy stick for one second, and the OSD appears on the screen. Move the Joy Stick up,

When the image is in front of strong background lighting, your camera allows you to get a clear image.SLC1/3 inch high density CCD and digital process

All camera functions are menu driven for easy use.OSDThe Intensifier camera has a DSP chip that can remove image noise efficiently showing cleanimages

OSD FunctionOperating your cameraSETUP MENU LENS TYPE●DC ●MANUALSHUTTER TYPE●OFF ●F/L ●MANUALWHITE BALANCE●ATW ●AWC MANUAL●SLC●OFF

SET UP menu is displayed on the monitor screen.Operating your camera – SETUP1. Press the SET button (JOYSTICK) to access the SETUP mode.Each time you

Operating your camera – SETUP LENS ① On the SETUP menu screen, move the arrow indicator to the lens using the UP or DOWN button.1) Setting up t

Operating your camera – SETUP LENS▶When DC LENS selected, press SET button to control the BRIGHTNESS.15

① Press the SET button to display the setup menu and move the arrow indicator to ‘SHUTTER’ using the UP or DOWN button.② Set ‘SHUTTER’ to the desi

Operating your camera – SETUP SPEED CONTROL. ②▶MANUAL : When setting the shutter speed manually. You can select speed from ‘1/60’ to

▶ELC : You can control the BRIGHTNESS.③When completed, press ‘SET’Avoid pointing the camera directly at a fluorescent lamp When the SHUTTER menu is se

Operating your camera – BACKLIGHT▶HIGH▶MIDDLE▶LOW▶OFF① Press the SET button to display the SETUP menu and move the arrow indicator to ‘BACKLIGHT’

① Press the SET button to display the SETUP menu and move the arrow indicator to ‘AGC’ using the UP or DOWN button.② SET ‘BACKLIGHT’ to the desir

Operating your camera – WHITE BALANCE① Press the SET button to display the SETUP menu and move the arrow indicator to ‘WHITE BALANCE’ using the

▶MANUAL : To fine adjust, select the Manual mode. You can increase or decrease the red or blue factor while monitoring the difference on the screen.

Operating your camera – REDUCE NOISE① Press the SET button to display the SETUP menu and move the arrow indicator to ‘DNR’ using the UP or DOWN bu

Operating your camera – INTENSIFIER① Press the SET button to display the SETUP menu and move the arrow indicator to ‘INTENSIFIER’ using the UP or

Operating your camera – CAMERA TITLE ①8) NEXT PAGEIf the CAMERA ID feature is set to ‘OFF’, the name will not displayed in the monitor.Notes① Press

Operating your camera – CAMERA TITLE ②If you make a mistake while entering a name move the cursor “ CLR”.Press “SET” button.After erasing the charac

Operating your camera – COLOR / SYNC① Press the SET button to display the SETUP menu and move the arrow indicator to ‘SENCE UP’ using the UP or DO

① Press the SET button to display the setup menu and move the arrow indicator to ‘SYNC’ using the UP and DOWN button.② SET to the desired mode usi

WARNING & CAUTIONThe lighting flash with an arrowhead symbol, within an equilateral triangle isIntended to alert the user to the presence of un-in

Operating your camera – MOTION DETECTION① Press the SET button to display the setup menu and move the arrow indicator to ‘MOTION DET’ using the UP

30Max. Min.

Operating your camera – PRIVACY① Press the SET button to display the setup menu and move the arrow indicator to ‘PRIVACY’ using the UP and DOWN bu

Operating your camera – REVERSE① Press the SET button to display the setup menu and move the arrow indicator to ‘REVERSE’ using the UP and DOWN but

Operating your camera – DETAIL① Press the SET button to display the setup menu and move the arrow indicator to ‘DETAIL’ using the UP and DOWN butto

Operating your camera – DEFAULT / PAGE 1 G) DEFAULT: Use to reset your camera to FACTORY DEFAULT SETTING.H) PAGE 1 : PAGE 1 : Save the setting of NEXT

TroubleshootingIf you have trouble operating your camera, refer to the following● Have you set ‘MOTION DET.’ menu to off?● Have you set ‘MD LEVEL’ to

● Have you connected your camera to DC power source? Connect it to AC power source.L/L mode isn’t able to be selected.● Is the camera facing to dir

SPECIFICATIONSInternal / Line Lock selectableSynchronizationDC AUTO IRIS VAROFOCAL 2.8~11mm LENS TYPE230mA(DC) / 3.8W(AC)Power Consumption-10 ~ +50

DIMENSIONS* SIDE VIEW* TOP VIEW 38

Package ContentsFeatures13ContentsPrecautions4Camera Installation5Internal Components79

WARRANTY39

VER. 070817This manual is based on the date as shown in the right and specifications are subject toChange without notice for quality improvement.200 N

Operating Your CameraTroubleshootingSET UPSET UP LENSSHUTTER SPEED CONTROLBACK LIGHTAUTO GAIN (AGC)WHITE BALANCEREDUCE NOISEINTENSIFIERCAMERA TITLEDAY

PACKAGE CONTENTS•Please make sure that the following items are included in the package: 1 CVC-6246iHR Camera 2 Mountin

PRECAUTIONS•THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED PERSONNEL• TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE PROPER POWER CABLE • T

CAMERA INSTALLATION CONNECT POWER CABLE 1. WHEN USING 12 VOLTS DC (constant voltage 600 mA) 2. WHEN USING 24 VOLTS AC (40 Vo

INTERNAL COMPONENTS7 1. Mechanical (1) DC AUTO-IRIS LENS Adjust between TW (TELE  WIDE) to set the angle (focal length) Set the focus by a