INSTRUCTIONMANUALWhite LED CameraSpeco Technologies is constantly developing product improvements.We reserve the right to modify product design and sp
- 10 -Ͷ΅ͶͿ͵Ͷ΅ͶͿ͵΄ͲͿͶ΄΄Ͷ΅ͶͿ͵Ͷ΅ͶͿ͵Ͷ΅ͶͿ͵Ͷ΅ͶͿ͵ͷͲʹ΅Ί Ͷ΄Ͷ΅Ͷ΅ͶͿ͵ͶΉͺ΅Ͷ΅ΆͿͶ΅ΆͿͶ΅ΆͿ;Ϳͺ΅Ͷ΅ΆͿʹ΅ͽʹ͵Ͷ΅ΆͿͲ͵ͻΆ΄΅Ͷ΄Ͷ΅Ͷ΅ΆͿͶ΅ΆͿͽͶ·Ͷͽ͙͑͑͡ί
- 11 -Menu items can be selected by using the OSD buttons of the camera1. Press the Set Up button.* The Set Up menu will be displayed on the monitor.2
- 12 -3. Change menu settings using the Left or Right button.* Available values or Status are displayed by pressing the Left or Right buttons. Press
- 13 -3. Press the RETURN to return to the SETUP menu.NOTE* When DC is selected, the brightness can be adjusted. The brightness controlrange is 1 ~ 10
- 14 -EXPOSURESENS-UPSHUTTERAGCSENS-UPBLCD-WDRRETURNSENS-UPRETURNAUTOMIDDLEAUTOOFFOFFRETx 4NOTE*Shutter: Select Shutter using the Up or Down button, y
- 15 -* OFF: BLC function does not operate.* BLC: Select LOW/MID/HIGHUser can select and define a specific area in scene and view the area clearly.Pre
- 16 -* HSBLE: HSBLC function is especially effective for reading car number plates at the night time.You can select and define the required observati
- 17 -* D-WDR: This camera which is using 3D-DNR DSP provides intelligent light level control to overcome evenstrong backlight conditions.→OFF: D-WDR
- 18 -White BalanceThe White Balance function is used to control the “on-screen” colors.1. Move the arrow indicator to WHITE BAL on the SETUP menu scr
- 19 -Day / NightPicture can be displayed in either colour of black and white.1. Select DAY / NIGHT using the Up or Down button on the SETUP menu scre
- 2 -CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK).
- 20 -AREASMART IR ONSMART IR OFFSIZEIR SMARTGAINAREARETURN 10RET→ AUTO: The mode will automatically switches to COLOR in normal co
- 21 -3DNR is used to reduce the level of background noise in a low luminance environment.1. Move the arrow indicator to 3DNR by using the Up and Down
- 22 -SpecialWhen the SETUP menu screen is displayed, select SPECIAL using the Up and Down buttons.Select one of the mode using the Up and Down button
- 23 -1-3) Press the SETUP button.CAMERA TITLECAMERA TITLE0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ▷ → ← ↑ ↓ ( ) -ㅡ _ □ / = & : ~ , .← →
- 24 -NOTE* In cases where the wrong Camera ID has been input...Move the cursor to CLR and press SETUP button to erase characters from left torig
- 25 -③ Select a new position by using the fourdirectional button, Press the SET button toconfirm the position.CAM12. D - EFFECTMove the cursor to D-E
- 26 -2-2) D - ZOOM: Digital zoom available, range x1 ~ x32.PAN : The pan range can be controlled between -10 ~ + 100TILT : The tilt range can be cont
- 27 -2-3) GAMMA : Desired gamma values can be adjusted between 0.05 ~ 1.00.2-4) NEG. IMAGE :ON : Activates negative image just like filmOFF : Normal
- 28 -4. PRIVACYHide an area you want to hide on the screen.4-1). When the SPECIAL menu screen is displayed, press the Up and Down buttons to set to P
- 29 -③ Move the arrow indicator to WIDTH to make desired width of cells to increase or decrease by using the Left / Right button between the level 0
- 3 -ContentsContents34532Sefety InstructionsPrecautionsTrouble ShootingMenu Set Up▶OSD Control Button▶Set Up Menu▶Menu Set Up▶Lens▶Exposure▶Back Ligh
- 30 -ADJUST1. When the SETUP menu screen is displayed, select ADJUST using the Up and Down buttons.SETUP1.LENS2.EXPOSURE3.WHITE BAL4.DAY / NIGHT5.3DN
- 31 -RESETResets the camera settings to the factory defaults.EXITPress the SET button in the EXIT menu to save the current settings and exit the SETU
- 32 -Trouble ShootingPROBLEMNorthing appears onthe screen.☞Check the power cable, power supply output and videoconnection between the camera and moni
- 33 -POLICY, TERMS AND CONDITIONS OF SALEThis statement of policy is in lieu of any other policy, expressed or implied, and no representative or pers
- 34 -- MEMO -
- 35 -- MEMO -
200 New HighwayAmityville, NY 11701631-957-87001 800 645 5516www.specotech.com
- 4 -PrecautionsDo not install the camera inextreme temperature conditions.Do not touch the front lens of thecamera.Never keep the camera pointeddirec
- 5 -Sefety InstructionsPrecautions for use Please handle this camera carefully :◑ This camera should be installed by qualied personnel only◑ Ther
VL5700BPVFVL5700BPVFW600TV LinesDC Auto Iris Varifocal Lens(4mm-9mm)True Day/Night CapabilityICR-IR Cut Filter Removable850nm IR LEDs * 14pcsWhite LED
- 7 -OSD Control Button1. Type A, Type B, Type C of OSD button could be used when it needs to OSD control.2. Type D is extra Option (wired Remote con
- 8 -● Setup MenuHow to Set Up the camera menu΄Ͷ΅͑Ά͑;ͶͿΆ ͵ͶͷͲΆͽ΅͑΄Ͷ΅Ͷ΅ͶͿ͵;ͲͿΆͲͽ΄Ά΅΅ͶͷͷͽΈ͑;ͺ͵͵ͽͶͺͷͷͶ΅ͶͿ͵ͷͷͽΈ;ͺ͵͵ͽͶͺ΄ͺ΅ͺͿ΄ͺͶͲͲͺͿ͵Ͷͷ
- 9 -Ͷ΅͑ͶͿ͵ͶΉ΅ͳΆ΄΅Ϳ͠ͷͷͲͺͿͷͷͶ΅ͶͿ͵ͷͷʹͲ;͑΅ͺ΅ͽͶͿ͠ͷͷͷͶͶͶͿ͠ͷͷ;ͺ·͞ͷͽͺ΅Ͳ΅Ͷͷͷ͵͞;͙͑Ω͑͢ί͑Ω͚ͤͣͲͿ͙͑͑͢͞͡͡ί͚͑͢͡͡΅ͺͽ΅͙͑͑͢͞͡͡ί͚͑͢͡͡Ͷ΅ΆͿ͙͑Ͷ
Comments to this Manuals