HT7248FFi 540 Line Color Dome CameraIntensifier Series, Focus FreeWall & Ceiling MountablePlease read this manual thoroughly before operation and
FeaturesSLCWhen the image is in front of strong background lighting, your camera allows you to get a clear image.INTENSIFIER1/3 inch density CCD and d
OSDAll camera functions are menu driven for easy use.Dynamic Noise ReductionThe Intensifier camera has a DSP chip that can remove imagenoise efficient
Operating your cameraOSD FunctionSETUP MENULENS TYPE● DC IRISSHUTTER TYFE● ELC ● FIXED ● MANUALWHITE BALANCE● ATE ● AWC ● MANUALSL
SETUP Menu Functions1. LENS (DC) – Lens is static with DC auto iris lens only2. SHUTTER (Option : OFF / FLK / MANUAL/ ESC)Flickerless mode (FLK) redu
5. Auto Gain ( Low / Middle / High)Increase the GAIN level to brighten the picture.(noise / distortion may develop)6. REDUCE NOISE (Low / Middle / Hig
NEXT PAGE Menu Functions1. CAMERA IDUP, DOWN, LEFT, RIGHT menu control = Select a character, then press (SETUP)MENU to accept it. The character is sav
3. SYNC (INT / Line Lock)INT : When line lock is not required.It synchronize the vertical interval sync pulse of yourcamera with other equipment to re
5. PRIVACYAllows you to mask certain areas of the screen from observationAREA SEL = Select a motion detection grid (top left, top right, bottom left,
TroubleshootingIf you have trouble operating your camera, refer to the following●Have you set ‘MOTION DET.’ menu to off?●Have you set ‘MD LEVEL’ to to
● Have you connected your camera to DC powersource? Connect it to AC power source.L/L mode isn’t able to be selected.● Is the camera facing to direct
WARNING & CAUTIONThe lighting flash with an arrowhead symbol, within an equilateral triangle isIntended to alert the user to the presence of un-in
SPECIFICATIONSInternal / Line Lock selectableSynchronizationFocus Free Lens 3.5~10mmLENS TYPE500mA (DC) / 6.6W (AC)Power Consumption-29℃ ~ +50℃ ( - 20
DIMENSIONS* SIDE VIEW* TOP VIEW 20
WARRANTY21
MEMO
200 New HighwayAmityville, NY 11701631-957-8700www.specotech.comVER. 080901This manual is based on the date as shown in the right and specifications
Contents3Package Contents4Precautions5~8Camera Installation9~10Features11~16OSD Setting17~18Troubleshooting19Specification20Dimensions21Warranty2
PACKAGE CONTENTS•Please make sure that the following items are included in the package:1 HT7248FFi Camera2 Mounting Screws1 Chameleon Dome Cover
PRECAUTIONS• THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED PERSONNEL• TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE PROPER POWER CABLE.
CAMERA INSTALLATION1. CONNECT POWER CABLE 1) WHEN USING 12 VOLTS DC (constant voltage 600 mA) -CONNECT ACCESSORY CABLE TO THE CABLE LEADOF THE CAMERA
CAMERA INSTALLATION2. CHAMELEON COVER INSTALLATION1) If you wish to change the color of the HT-7248FFi, place the Chameleon Dome over the camera* Sp
CAMERA INSTALLATION3. CONTROL BOARD1) Video Test TerminalFor second video output2) OSD (On Screen Display) Joy stickPress the Joy stick for one secon
CAMERA INSTALLATION4. DIP Switch Setting for RS-485 (Pelco-D)2) Baud rate Settingto set Baud rate, please refer the chart below.1 2 3 4
Comments to this Manuals