HTSD10X 10X Pan-Tilt Speed Dome Camera Please read this manual thoroughly before operation and keep it handy for further reference.
10A. OSD MENU TABLE OSD MENU SETTING MAIN MENU DOME SETUP CAMERA SET AUTO SCAN TOUR PRAVACY PATTERN ALARM SECTOR
11To enter the OSD Menu, press the button 95 + PRESET. * Use the joystick “up - down” to move the position and “left - right” to make s
12 B-2. DOME SET - RECOVER This feature allows the dome to work from the last setting before you use the dome manually (Auto scan, group tour, pat
13 B-8-2. DOME SET – [NEXT PAGE] – [PASSWORD] To enter this page to set a password, move the joystick to the right direction. The password must be
14 B-8-4. DOME SET – [NEXT PAGE] – [SYSTEM STATUS] This page shows the information of this camera. - Protocol and baud rate are show
15 - To clear memorized data, move joystick to the right direction when cursor is on each item. Press FOCUS NEAR button when the cursor is a
16 C. CAMERA SET C-1. CAMERA SET - FLICKERLESS Flickerless feature is selected between 50Hz and 60Hz. The default setting is OFF (
17 C-6. CAMERA SET – PIC FLIP Picture flip feature turns ths picture upside down. Move the joystick to the right or left direction to select OFF/
18D. PRESET SET To enter PRESET SET, move the joystick to the right direction. D-1. PRESET – PRESET NO. Up to 164 numbers of preset posi
19E. AUTO SCAN SET * 66 + preset button is working as AUTO SCAN after setting. E-1. AUTO SCAN – START ANGLE To set the start
2 Warning & Caution What’s in the Box? General Features
20F. TOUR SET 8 Programmable tours can be set and each tour is available to set up to 64 preset steps. After setting the data to each tour group
21G. PRIVACY SET 4 Privacy masking zones are available to block out areas of the scene. G-1. PRIVACY SET – PRIVACY NUMBER. Up to 4 priv
22H. PATTERN SET 8 programmable patterns are available with 16 characters of title. After setting the data to each pattern # 1~8, 81~88+ preset but
23I. ALARM SET 4 Alarm inputs are available and each alarm can activate presets, group tours or patterns. I-1. ALARM SET – ALARM NO. Up
24J. SECTOR SET Up to 8 programmable sectors are available with 16 characters. This feature is useful to memorize certain locations such as a parki
25A-1. DIP SW SETTING This Speed Dome camera provides up to 63 camera ID’s, adjustable using the 1st~6th Dip switch. Open the camera case to set
26 A-3. PROTOCOL 7th~8th dip switches are used for Protocol Setting. Factory Default: Pelco-D or Pelco-P ( Auto detection) DIP SW1-
27If you have trouble operating in your camera, refer to the following. PROBLEM SOLUTION Not operating Check if the power su
28 MODEL HTSD10X PAN /TILT Pan Rotation Angle 360˚ Endless Pan Speed Manual 10˚ ~ 200˚/sec Preset Max 200˚ /sec Tilt Rotation Angle 0˚ ~ 90˚
29 DIMENSIONS
3 WARNING & CAUTION If you fail to read this information an
30 MEMO
32 Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specificati
4 GENERAL FEATURES 100X Zoom Mini Speed Dome 10X Optical Zoom with 10X digital zoom ±0.02° dome system ac
5 NAMES OF EACH PART1. Surface Mount Adaptor 2. Cap Screw ( PT3/4 , 2EA ) 3.
6A. CONNECTION METHOD A-1 1. Loosen the screws on the domes cover and remove it from the base. (Screws will not come out) 2. Loosen the sc
7B. MOUNT 1. Attach the surface mount adaptor with 4 screws at the installation site. (FIG.4) 2. When you use pipe, please note t
8 1-64 + preset and 101~200 + preset are used for preset and 65-100 + preset used for functions. For example, to enter OSD MENU, press the butto
9 When the Power is turned on a DIAGONOSTIC is operated. The following messages are displayed on the monitor. A. Pan Origin Test
Comments to this Manuals